Tips for taking the landscape for the beginners

When shooting portraits, Street Style … .. we will have taken a separate process and tips. But in order to apply, they must know the basic tips, this article will give you the information needed to setup 1 photographic process Lanscape style.

Each person will have a 1-sensitized individuals, this difference is evident for the landscape photographer. But one way to capture the scenic photos, not everyone can do it. Here are 8 simple steps will, spend ti

1. Select a RAW + JPEG format.

Let’s switch to RAW and JPEG image formats, if we are not like photographs carpentry through the editing JPEG format will be optimal, also referred proficient photoshop and want photos shimmering select RAW formats. RAW image format will contain more information about color, especially different color ranges, such as the sky.

2. Use the ISO at 100/200

Please use the lowest ISO settings. Most will have a minimum camera is ISO 100, but can also be a low ISO 200 will ensure the photos at the wrong color in the most affected, the picture will not be disturbed particles.

3 Use the aperture to f / 16 mode A / AV

Smaller aperture (f / x with x greater), the depth of field will be even more wonderful. This also explains, do not let the smaller aperture at f / 16, this may affect the softness of the image. To install this component, select Aperture Priority Mode (A / Av), then use the dial to select the aperture.

4. Use the included Tripod

After everything was set up, use a tripod to shoot landscape photos. Remember to check whether there was inclined Tripod and strong enough or not, it is not setup properly tripod can cause lodging and ruin our camera, if possible, use the remote control to add 1 to avoid impacts into the camera while shooting, minimizing image shake.

5. Do not focus in the center of the frame

The majority of them focus in the center of the frame, but will usually get one shot photos with the balance, here we photographed the landscape, should not be applied. When you start looking angle, use layout “one third” most fundamental. Also look for the path and the objects in the background to increase the depth of the picture.

6. Rule “part three”

Focus on one third rule to maximize depth of field. If one of the focus points is located at the corner position you want to focus, use autofocus, vice versa, select the nearest point of the frame, using the autofocus, then switch to manual mode to lock focus.

7. Try to take some pictures.

Try shooting some pictures and check the color chart. The chart will display in balance if the image in the “fit ‘- harmony between light and dark, the left column will be dark, the right will be bright. The most important thing to see is a picture graph with colors not too bright or too dark that graph showing the loss of the head.

8. Metering.

If you think the image is too bright or too dark, press and hold the button and use the +/- keys to adjust Exposure Compensation dial. -1 Will be on the left – makes the image darker, +1 would be right to make images light up. Try taking several shots to test the ability of the camera metering and quality of the image before shooting

Be the first to comment

Leave a Reply

Your email address will not be published.